Dongguan Chuangwei Electronic Equipment Manufactory
ChuangWei Electronic Equipment Manufactory We are the first Factory in China that provides TOTAL FULL SOLUTION for Electronic factories.
Add to Cart
Reflow Wave Solder Pallets Matrix Fixture Adjust PCB Fixtures
The demand for CW’s SMT Assembly Fixtures is growing as they are a solution to solving many of the challenges associated with SMT assembly. Our solid design capabilities are proven to handle even thin PCBs as well as brands with unusual form factors. Some of DMI’s design features include:
1. Optical grade composites to make it much easier for the PCB present sensors to ‘see’ the fixture.
2. CW offers a unique design using a built-in spring-tension pin to hold the PCB in place for ultra-precise applications or interference fits. These sliding board tension locks secure PCB’s (ranging in thickness from 0.005” to 0.125”).
3. CWs pallets are designed to set the PCB .005” ‘proud’ above the fixture for optimal screen printing results.
Print through & reflow pallets keep the PCB flat providing solid stabilization for the stencil during the reflow process. DMI developed a special pin for the purpose of holding evenly-distributed tension on the PCB.
This innovative technique allows the operator to maintain both the crucial planarity of the PCB and the critical alignment of the stencil during the process of printing solder paste, component pick-n-place, and the soldering of components.
CW’s implementation of this innovative pin design has eliminated the need for Kapton tape, reducing materials waste and offering a cleaner securing and releasing of the PCB from the pallet. This quick and easy method is far less labor intensive and more economical.
Because no tooling parts extend more than a few thousands of an inch above the surface of the PCB, CW’s print through & reflow pallets work exceptionally well for the stencil to print properly on even thin PCBs with thicknesses under 0.010”.
For PCBs that can offer challenges during reflow operations, we offer fiducials on the pallet to align the PCB to both the stencil printer and pick-n-place machine.
Because the pallets hold the PCB flat, crucial planarity is constantly maintained. This helps ensure accuracy throughout the stencil paste application process and the component pick-n-place process, ultimately improving yields.
On flex PCBs, DMI offers tension fitting to provide secure and accurate seating of PCBs against pallets. By using custom pins mounted on spring leavers, PCB is stretched firmly into the recess of the pallet to maintain proper orientation during stencil screen printing and accurate pick-n-place. Fiducials are valuable on any Print Through & Reflow pallet.
On thicker PCBs,CW offers compression fitting to provide secure and accurate seating of PCBs against pallets. By using edge tensioners, the PCB is held firmly into the recess of the pallet to maintain proper orientation during stencil screen printing and accurate pick-n-place.
Specification:
| Model | DurostoneCHP760 | DurostoneCAS761 | DurostoneCAG762 |
| Grade | Standard | Anti-Static | Anti-static(Optical) |
| Colour | Blue | Black | Grey |
| Density(g/mm3) | 1.85 | 1.85 | 1.85 |
| Standard OperationTemperature | 260 | 260 | 260 |
| Maximum Operation Temperature(C) | 350 | 350 | 350 |
| Sheet Size(mm) | 2440×1220 | 2440×1220 | 2440×1220 |
| Tickness/weight(mm/kg) | 3/17, 4/22 | 5/28, 6/33, 8/44 | 10/55, 12/66 |
Our sales network
This estimation may be done in three ways
If a PCB is available (preferably populated) - our sales engineers can rapidly evaluate your board.
If PCB design data is available we will process, analyse and remotely assess it.
You can do it using the rules presented below - our customers quickly find that the above two methods are easiest.
Gerber, Excellon and other data required
Pin Land to SMT pad clearance evaluation
The two figures below each show part of a CSWSC in plan and section views. The right hand figure shows that more clearance
is required when the connector orientation is perpendicular to the wave.
PTH Components Located Parallel to direction through wave
The clearance required between the pin land and SMT pad can be made quite
small, as the solder does not have to flow "under" the component pockets.
PCB Design Implications - for Board Designers - or respin
We are often called upon by our customers to help with identifying design respin opportunities.
We will identify problem areas within a board and suggest appropriate movements of components. (Ideally before the PCB is fabricated)
However for board designers reading this, can you remember another four "rules" (to compete with the hundred other rules you have to have floating
around in your head).
Keep large (height) SMT components away from PTH areas.
Leave the leading and trailing areas around PTH components as clear as possible.
DON'T put any SMT components within 3mm (0.12") of any PTH components.
DON'T put all PTH components in line along one edge of a board - leave some space to allow us to support the masking in the centre of the board.